Author Topic: 4000G group faders total recall problem SOLVED (Read 5702 times)

jwhmca · « **on:** July 17, 2014, 12:16:06 AM »

Hi Guys,

The group VCA faders don't want to stay on the group you assign them to in recall... meaning, If you you set them all to 8 (or other numbers) and do a snapshot, the recall will have them all kinds of random numbers...

sintech · « **Reply #1 on:** July 17, 2014, 09:17:48 AM »

Hi, the only way the computer can read the VCA Thumb Wheels is via the S14 50 way ribbon, from the VCA bus card to the computer.

Then, via the analog input card, to the Total Recall.

The VCA faders would also share this path into the recall, they respond as you would expect?

sintech · « **Reply #2 on:** July 17, 2014, 09:36:22 AM »

Looking at the drawings, I think it sees the switches via the LED and Switches daughter Card, if so, it could be that you have a bad IC.

(I've only been fooling with the computer for just a few months)

Edit: And.. it's not done that way!! Thinking it must interact with the 20 card.

Showcase · « **Reply #3 on:** July 17, 2014, 11:45:47 AM »

I also have the exact same problem so If you find whats causing yours, please post

jwhmca · « **Reply #4 on:** July 22, 2014, 07:28:41 PM »

Rebooted the SSL computer solved it.

zane · « **Reply #5 on:** July 23, 2014, 02:58:48 AM »

haha, awesome.

SSlmixed.com Forum

News: