« previous next »
Pages: [1]

Author Topic: Bypassing the Moving Fader card for 613/612 test jig?  (Read 4411 times)

jwhmca

  • Full Member
  • ***
  • Posts: 134
  • Karma: +4/-0
Bypassing the Moving Fader card for 613/612 test jig?
« on: October 29, 2014, 03:48:15 PM »
Hi Guys,

So how/which part do you "bypass/jump" to run a Ultimation channel strip with the moving fader card on the 613/612 test jig?
Logged
"It's all about being a servant."

xmax

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +10/-3
Re: Bypassing the Moving Fader card for 613/612 test jig?
« Reply #1 on: January 15, 2016, 04:53:32 PM »
You just need to jump in and out on the fader ribbon for "motors on" mode.
I'm still trying to figure out "motors off".  8)
Logged

xmax

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +10/-3
Re: Bypassing the Moving Fader card for 613/612 test jig?
« Reply #2 on: January 15, 2016, 05:15:23 PM »
So it looks like we just need to steal the 0-5V vca voltage from the non-ultimation pins
on the test jig "backplane" and trigger vca mode on the ribbon. Details to follow.  :P
Logged
Pages: [1]
« previous next »