Console finally upright …..

[Jdm5149]

so now i'm thinking i only moved pins for the new 8 "e" 242 channels i bought after the console. i installed the multiplex cards and transferred the pins but thought i did the original 32 channels. been a crazy 6 months planning the move and i must have forgot about doing the rest  here are 2 pics and im assuming the one going to bypass is the incorrect one.  Thanks Dave !  I'm hoping this is the solution once i'm done    There’s also the vca trim that has no jumper.

[Jdm5149]

Set all jumpers and resolded pins.  A few channels are pulled out. So a total of 32 installed for now. Still no movement on bar graphs during test. I tried using original disc programmed for 32 ch and turning off last bucket.  Still no movement. Maybe I’m rushing things or missing something. Vca and master still show movement.  How can I make a 40 channel program disc setup for this console. Commands online do not work.  Sorry about being all over the place. Just wanna set this console up and start making music. Vca to meter does show movement on meters so I’m thinking it’s problem with computer. If master Vca card was problem Vca to meter wouldn’t be working ??